Chelsea Online

Xenta white switched single socket with 2 x USB charging ports. perfect for charging iPads, iPhones, tablets, mobiles, cameras and more.   Specification: 5 volt 2.4 amp shared USB outputs  Type A Requires 25mm depth wall box We recommend using a competent person for installation. Only suitable for indoor installations. Before carrying out any electrical work, isolate the mains power supply & refer to the fitting instructions.  For safe installation & connection ensure that the earth is connected. Wire/wiring colours are in accordance with the current IET Wiring Regulations. Before use we recommend that a socket test is carried out. This device must be installed by a competent person, in accordance with the current edition of the IET Wiring Regulations (BS7671) & Building Regulations. Please read these instructions carefully before commencing with installation. Failure to install correctly will negate the product warranty. Instructions:   Firstly, ensure you isolate the mains power supply and remove the fuse in the fuse box or switch off the circuit breaker in the consumer unit. Following the diagram over-leaf pass the cable through the entry holes and connect to the appropriate terminal. If an Earth loop connection is required, use the additional earth terminal block located in the back box. Re-connect the mains supply when the installation is correctly completed. Before use we recommend that a socket test is carried out. DO NOT MEGGER TEST  this will damage the USB charging circuit.