Price search results for VISION AV 1700 Stereo Amplifier 2 x 30w
AV-1700 front angleThe Techaudio AV-1700 is compact, flexible, easy to use and is extremely efficient. Use as a standalone mixer and amp, or as a mixer which outputs to a bigger amp or powered loudspeakers. 4 x Stereo Inputs 4 stereo inputs accept input from a variety of sources such as computers (via the headphone jack), tablets or phones. 3 of the inputs are via 2-phono (RCA) connectors on the rear panel. Input 4 is via a 3.5mm minijack connector, and is duplicated on the front and rear panels for easy access. Line Output A line-level pre-output on the rear panel bypasses the internal amplifier. It would connect to a larger amplifier or powered loudspeakers. It is post-mix, which means any volume adjustment made on the AV-1700 affects the output level. Microphone Input It uses a professional XLR connector and the input is balanced to eliminate electro-magnetic noise induced on long cables. The microphone input has “Phantom Power” – a voltage which is required by condenser-type microphones such as lectern microphones. Remote Control The IR remote control gives the user bass and treble adjustment and direct input selection. The AV-1700 can be controlled by a control device such as Techconnect Control via IR or RS-232. Simple Interface The clear simple interface offers the user just two dials. Auto-Standby If the amplifier senses no input it will automatically go into standby mode. As soon as you press play on your source device it will automatically switch on again. Mounting Options Optional mounting hardware is available which allows attachment to a wall, projector ceiling pole, or rack. Specifications AMPLIFIER DIMENSIONS: 220 x 154 x 44mm (wide x deep x tall) not including dials and connectors CARTON DIMENSIONS: 293 x 233 x 133mm AMPLIFIER WEIGHT: 1.2kg PACKAGED WEIGHT: 2.0kg COLOUR: White INPUTS 4 x Stereo inputs (via 3 x phono connectors / 1 x 3.5mm minijack) 1 x Microphone inputs via balanced XLR OUTPUTS 1 x Stereo Line-level output via phono connectors TECHNICAL DETAILS 2 x 30w @ 8 ohms Total Harmonic Distortion <2% Frequency response (line in): 50Hz~18kHz Signal to noise ratio (line in): 75dB Rating input level/Impedance: line in 440~500mV/47kohms Power consumption (rating condition): <=125W ACCESSORIES INCLUDED 1 x 2-phono to 2-phono cable 2m long 1 x 3.5mm to 3.5mm minijack cable 2m long 2 x Unshielded Speaker Cable 5m long 1 x UK C7 figure-8 power cable 1.8 m long 1 x EU C7 figure-8 power cable 1.8 m long 1 x AU C7 figure-8 power cable 1.8 m long 1 x US C7 figure-8 power cable 1.8 m long POWER SUPPLY: 100~240V Internal Power Supply
