Chelsea Online

HyperX HX421C14FBK2/8 is a kit of two 512M x 64-bit (4GB) DDR4-2133 CL14 SDRAM (Synchronous DRAM) 1Rx8, memory module, based on eight 512M x 8-bit FBGA components per module. Each module kit supports Intel Extreme Memory Profiles (Intel XMP) 2.0. Total kit capacity is 8GB. Each module has been tested to run at DDR4-2133 at a low latency timing of 14-14-14 at 1.2V.  - Power Supply: VDD = 1.2V Typical - VDDQ = 1.2V Typical - VPP - 2.5V Typical - VDDSPD = 2.2V to 3.6V - Nominal and dynamic on-die termination (ODT) for data, strobe, and mask signals - Low-power auto self refresh (LPASR) - Data bus inversion (DBI) for data bus - On-die VREFDQ generation and calibration - Single-rank - On-board I2 serial presence-detect (SPD) EEPROM - 16 internal banks; 4 groups of 4 banks each - Fixed burst chop (BC) of 4 and burst length (BL) of 8 via the mode register set (MRS) - Selectable BC4 or BL8 on-the-fly (OTF) - Fly-by topology - Terminated control command and address bus - Height 1.230” (31.25mm), w/o heatsin